Heavy duty air Bosch Blower with Dust Extraction GBL 82-270 Professional- Heavy Duty – (820 W, 2.25KG) (Blue) (GBL 80-270)

Technical data

Additional data
Rated input power	820 W
Weight	2.25 kg
Volumetric flow rate	4.5 m³/min
No-load speed	16,000 rpm

Advantages

The handy tool for blowing and dust extraction

• Strongest air flow for better work efficiency
• Highest air flow volume
• Powerful motor

Functions

Safety instructions for Heavy duty air blower Bosch

• Do not vacuum or blow any harmful substances, e.g. beech or oak wood dust, rock dust or asbestos. These substances are considered carcinogenic.
• Do not vacuum or blow any liquids. The penetration of liquids increases the risk of an electric shock.
• Ensure that the workplace is well ventilated.
• Do not let children use the power tool unsupervised. Children are at risk of injuring themselves this way.
• Wear additional personal protective equipment such as protective glasses and a protective mask. Wearing personal protection equipment appropriate to the conditions reduces your exposure to hazardous substances.

Products sold in GB only:

Your product is fitted with a BS 1363/A approved electric plug with an internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorized customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric
  shock.
• Never use the power tool if the cable is damaged. Do not touch the damaged cable and pull out the mains plug if the cable is damaged while working. Damaged cables increase the risk of an electric shock.
• Do not crush the cable or run the device over it. Do not pull on the power cable to pull the plug out of the socket or to move the power tool. Damaged cables increase the risk of an electric shock.
• Pull the plug out of the socket before adjusting the tool settings, changing accessories, or storing the power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally.